WRIN Pty Ltd
SAFE TRIGGER RELEASE HANDLES
WRIN Pty Ltd
SAFE TRIGGER RELEASE HANDLES
WRIN Pty Ltd
SAFE TRIGGER RELEASE HANDLES
STR HANDLES are designed to be attached to Chain Hooks to eliminate the risk of personal injury and to simplify the operation of the latch release trigger. 

These STR Handles are a must for the safety conscious.
FITTING INSTRUCTIONS
STRG13 HANDLE FITTING

1.       Remove existing trigger from hook.


2.       Place Right Hand (1) and Left Hand (2) handle halves over hook and secure with Screws (3) finger
           tight only.

3.       Insert Spring (5) into new Trigger (4) and locate with Pin (6).

4.       Insert new Trigger (4)(5) and (6) into hook and align with holes of hook and Handle.

5.       Insert Bolt (7) through Handle and hook simultaneously pushing out Pin (6) and tighten
           securely with Nut.  Discard Pin (6).

6.       Tighten all screws (3). 

7.        If deemed to be required secure  all Screws (3)  and Nut of Bolt (7) with 'Loctite' (or similar), or tack
            weld end of screws (3)  and Nut to Bolt (7) to lock into position.  Welding, if used, shall be TIG-weld
             with 316SS wire.

8.        Check handle on a weekly basis.  Lubricate trigger with fine oil when required.
STRG16 TO 32 HANDLE FITTING​​

1.        Insert Trigger Pin (1) in LH Handle (2).

2.        Place Trigger (3) over Trigger Pin (1).

3.        Place Left Hand Handle (2) and Right Hand Handle (4) to each side of Hook and secure with
            Screws (5) finger tight only.

4.        Remove hook’s existing trigger spring pin and insert new Bolt (6) simultaneously.  Ensure
            Screws (5) are already in place. 

5.        Tighten all Screws (5) and tighten Bolt (6) securely with Nut.

6.        If deemed to be required secure all with ‘Loctite’ (or similar), or tack weld end of screws and Nut to 
            Bolt (6) to lock into position.  Welding, if used, shall be TIG-weld with 316SS wire.

7.        Check handle on a weekly basis.  Lubricate trigger with fine oil when required.